STEC | 先进的 OEM SSD 和存储解决方案| 欢迎您

Introducing MACH4, the World’s fastest CompactFlash optimized for embedded OEM applications as only STEC can deliver. With multi-channel support, Ultra DMA performance, and TrueIDE mode support, it represents the fastest, highest capacity, and most reliable compact storage solution available in the industry today.

Revolutionizing the way CompactFlash is used, STEC’s new MACH4 CompactFlash platform is a high-performance industrial NAND flash storage device suitable as a hard disk drive replacement or alternate storage device in a wide variety of industrial applications.

Because the MACH4 CompactFlash uses solid state NAND flash technology, it has very low latency compared to a traditional hard disk drive, consumes far less power (approximately 200 milliamps or 1 watt compared to 12 watts for a standard 7200rpm ATA disk drive), and performs much better under extreme environmental conditions.

With its small footprint, high capacity (up to 32 gigabytes), and throughput up to 90 megabytes per second, the MACH4 CompactFlash is an ideal hard disk drive replacement or alternate storage solution in space-constrained or rugged applications or those requiring less capacity than available hard disk drives offer including blade servers and embedded PCs.

特征

3 年保修 (请参见保修条款)

•	CFA Compliant for greatest compatibility
•	Type 1 CompactFlash card with 4 independant flash channels
•	ATA and True IDE Mode Support
•	Ultra DMA
•	Capacities up to 16GB (32GB with MLC flash)
•	Full RoHS 6/6 compliance

•	Built-in Wear Leveling and Block Management for ultra-high endurance
•	Full data-path protection with built-in 8-bit ECC engine for highest reliability
•	Built-in power-down data protection
•	Commercial and Industrial Operating Temperature Range

规格

SPECIFICATION

MACH4 COMPACTFLASH (CF)

接口

•	50-pin CompactFlash
	Transfer modes:
	UDMA 0-6, MWDMA 0-4, PIO 0-6
	Supports PC Card Memory
	PC Card I/O, True IDE Mode and Ultra DMA

容量

•	Up to 16GB (SLC), 32GB (MLC) – Type 1 format

读写性能

•

80/60

耐用性

•	Up to 10 years estimated life in normal operation conditions

	环境
	抗冲击
	抗振动
	湿度
	工业温度


•	1500G
•	20G
•	85°C 85% RH, 500 hrs
•	-40°C to 85°C

	耗电量
	睡眠/闲置模式
	工作模式


•	2mA (max)
•	210mA (max)

教育中心
为什么选择 MACH4 CF？

显示所有 | 隐藏所有

World's Fastest Performance	Highest Capacity	High Reliability
Compatibility	Form Factor	Security
Standard Compliance

WORLD'S FASTEST PERFORMANCE

MACH4 COMPACTFLASH (CF)

World’s fastest performance is ensured via SLC NAND flash and state-of-the-art 4-channel controller technology. Additional customized features allow for optimized performance in small sector write applications.

HIGHEST INDUSTRY CAPACITY

MACH4 COMPACTFLASH (CF)

STEC's patented IC Tower® Stacking Technology make it possible to provide the highest capacity Compact Flash in the industry, up to 16GB with 32GB supported with MLC flash.

HIGH DATA RELIABILITY

MACH4 COMPACTFLASH (CF)

STEC’s proprietary state-of-the-art flash memory controllers provide high data reliability and endurance. The built-in data-path protection with 8-bit ECC engine and sophisticated wear leveling algorithms ensure the greatest data integrity and longest possible life out of NAND flash technology. Based on SLC Flash and high quality components, STEC Compact Flash solutions provide an unparalleled MTBF of more than 8,000,000 hrs. In the event of host system power loss, data integrity is further assured via STEC’s power-down data protectio methodology ensuring that critical data is not lost or corrupted.

COMPATIBILITY

MACH4 COMPACTFLASH (CF)

For applications requiring an IDE interface, compatibility is ensured by the CompactFlash card's ATA and True IDE support. The Compact Flash cards operate in Ultra DMA modes by default but can also operate in legacy PIO modes as well as Multiword DMA. Because STEC develops its own controller and firmware, the Compact Flash cards can be adapted to meet a wide variety of timing and software requirements.

FORM FACTOR

MACH4 COMPACTFLASH (CF)

Compact Flash cards can be used to interface with a host system via the standard 50-pin CF connector or a standard 68-pin PCMCIA connector when using the STEC PCMCIA adaptor.

SECURITY

MACH4 COMPACTFLASH (CF)

STEC's TotalDriveProtection provides multiple levels of security including password write-protection (enabled in hardware and software), read-protection, secure partitioning, and custom ID strings to allow customers to protect preloaded content from piracy.Additional security features including AES encryption and data purging are available.

STANDARD COMPLIANCE

MACH4 COMPACTFLASH (CF)

STEC Compact Flash cards comply with CE requirements, FCC standards, and have been approved by the UL organization. The cards are also provided in full lead-free (RoHS-6) designs for worldwide deployment.